Enercon Corona Treating Systems
Enercon Blown Film Treating System meets application needs at Low Cost.
The Enercon Blown Film Treater is the culmination of a quarter century of application experience in meeting the specific requirements for surface treatment on blown film extruders. This compact, simple construction that allows 2-side treating and adjustable lane treating meets all the basic application needs. Add to that a station that is visually open, easy to thread and an electrode system that provides simple, trouble-free air-gap adjustment. Finally, compare the price of this system with any other. Now you have the ultimate in Blown Film Treating! |
| |
 |
|
 |
| Blown Film Station with Optional High Voltage Transformer Bracket Mounted. |
|
Blown Film Treating Station Showing Electrode Retraction Levers and Ozone Exhaust Flange. |
|
| |
Standard Features & Benefits
Overall Station Dimensions: |
| |
| Station |
Depth |
Height |
Width |
| with Mounted XFMR: |
20”(508 mm) |
15”(381 mm) |
43.25”(1099 mm) + Treat Width |
| without XFMR: |
20”(508 mm) |
15”(381 mm) |
23.5”(597 mm) + Treat Width |
| |
|
|
|
|
Standard Treat Widths
(TW): 42”(1067 mm), 52”(1321 mm), 62”(1575 mm), 72”(1829 mm)
Electrode Assembly
- 1/8” (3 mm) Aluminium, Flip-type segments, Special Design*, Custom-manufactured
- 1.25” (32 mm) Electrode width (determines Electrode Area and Dwell Time)
- Electrode air gap adjustable from outside the Station
- Manual Lever and Lock Mechanism for Retraction of each Assembly
- Two-side Treatment - One Electrode Assembly per Side
- High Voltage Transformer (XFMR) with 10’ (3 meters) of HV wire
|
 |
| Electrode segments in and out of treat
position to allow lane treatment. |
|
|
Treater (Ground) Roll
- 3.9” (100 mm) Diameter, Steel, Dead Shaft mounted on Free-Running Bearings
- Silicone Sleeve Dielectric
Frame Construction
- Aluminum End Plates
- Aluminum Extrusion Tie-Bars
- Bolted Frame
- Aluminum Ozone Exhaust Flange
Safety
- Lexan Station Covers – Provide Complete Visibility and hinge for easy threading
- Magnetic Safety Switches on hinged station covers
- G-10 Insulator isolating the Retraction Handle from Electrode
- Ozone Exhaust Flange on opposite end from high voltage connections
- Zero speed Sensor – shuts down Power Supply when the line stops
- NEMA 1 Low Voltage Terminal Box for Speed Sensor and Interlock Connections
|
 |
| Port provided in end plate permits viewing of electrode air-gap during operation. |
|
| |
Treater Station Options
- Pneumatically Actuated Electrode Retraction
- Electronic Airflow Switch mounted in the Station Exhaust Duct
- Ceramic or Epoxy Covered (Ground) Treater Roll
- Bracket for mounting high voltage Transformer (XFMR) to Station
- Stainless Steel Segments
Power Supply Features
- 7 Ratings: 1, 2, & 3 kW in a 17” (432 mm) H x 14” (356 mm) W x 12” (305) D Enclosure**
- 4, 5, 7.5 & 10 kW in a 22” (546 mm) H x 14” (362 mm) W x 13” (337 mm) D Enclosure**
- Flip-Open NEMA 1 Enclosure
- Latest State-of-the-Art Control and Power Circuits and Components
- Membrane Panel Control and Indication: Digital Readout of output kW
- Easy Setup & Operation
- Self-Checks All Interlocks for Safe Start-up
- Retains Set-point in Non-Volatile Memory
Power Supply Options
- Remote Control
- “Chassis Only” for Mounting in Customer’s Enclosure
|
| |
|
