Compak 2000: Power & Watt Density Control
Compact Design. Powerful Performance.
The Enercon Compak 2000 power supply is the culmination of over 25 years of power supply development. Its innovative design takes advantage of the state -of-the-industry control and power circuit components to meet the challenge of automatically matching the load requirements of a variety of electrode types.
Convenient, easy-to-use operating features increase productivity. Upgrade options include watt density control, remote control and computer interface options.
COMPAK 2000 Outstanding Features
- 1 kW through 7.5 kW models
- 30 to 1 turn down ratio
- Efficient with any roll/electrode combination
- bare/covered roll
- blade to shoe or tube-to-segmented electrodes
- Flip-open design
- Quick Connect plug-in controls
- 0.95 (or higher) displacement power factor from 0 to 100% output
- Membrane panel controls and indicators
|
| |
Quick Connect
obsoletes hard wiring |
Compak™ 2000
Power Supply |
| |
 |
The modular design and
flip-open feature provide
easy access for maintenance. |
1 kW to 7.5 kW power
available in a compact
NEMA 1 enclosure. |
|
| |
| System Features |
System Advantages |
| Broad Load Matching |
- Use with any station
- Reduces operator error
|
| 30 to 1 Turn Down Ratio |
- Allows for broad control of power output
|
| Automatic Full Power Transfer |
- Full treating power transfer to the station from min. to max. power
|
| Membrane Panel Control & Indicators |
- Digital readout of output kW
- Easy setup and operation
- Self-checks all interlocks for safe start-up
- Retains set point in non-volatile memory
|
| System Diagnostics
LTI Plus |
- LED’s display operating status and fault isolation
- Loss-of-treatment indication
|
| Easy Installation |
- No Input Isolation Transformer required
- Quick Connect provides plug in connections for input/output, interlock and watt density controls
|
|
| |
| Technical Specifications |
|
| All input 50/60 Hertz |
1-3 kW model |
| Rating |
Volts |
Phase |
| 1 kW |
115 |
1 |
| 2 kW |
240 |
1 |
| 3 kW |
240 |
3 |
| |
|
|
Width x Height x Depth
17” x 14” x 11.5”
(431 x 356 x 292 mm) |
|
| |
|
4-7.5 kW model |
| Rating |
Volts |
Phase |
| 4 kW |
240 |
3 |
| 5 kW |
240 |
3 |
| 7.5 kW |
240 |
3 |
| |
|
|
Width x Height x Depth
18” x 28” x 9”
(457 x 711 x 229 mm) |
|
| |
|
|
| Operator Controls/Indicators |
| |
Membrane Controls
- POWER
- Up/Down Push-button(s)
- START/Stop
|
|
Indicators
- Digital Meter:
- Digital readout displays
- Output kW
|
LED’S:
STANDBY - Amber; TEMP - Red; REMOTE - Amber
RUN - Green; FAULT - Red; GEN - Red |
|
|
Output Frequency:
Automatically adjusts over wide 5:1 load range
Ambient Environment:
- Temperature 50º C
- Humidity 90% Non condensing
Advanced Protective Circuits Guard Against:
- Over-Temperature
- High-Voltage Arcs
- Over Current
|
| |
| Performance Enhancing Options |
| |
|
 Watt Density Controller/Computer Interface
- Allows operators to set a precise watt density in seconds.
- Automatically adjusts power to compensate for line speed variations to provide constant treat levels.
- Set points are stored in memory
- Dimensions 10” x 10” x 6”
|
Skip Treat Controller
Simplifies skip treat set-up.
Automatically determines and maintains power on/off switching requirements. |
| |
|
 Diagnostic Panel
LED’s identify faults for easy treater station troubleshooting:
- Power
- Electrode position
- Insufficient Purge Air (if required)
- Zero Speed
- Air Flow (exhaust)
- Customer Interlocks
|
Remote Control
Provides operator with full function control at a convenient location.
(5” x 5” x 12”) |
|
| |
Customer Support Program
- World-wide start-up assistance and field service support
- World-wide rapid parts shipments, loaner and exchange programs
- 24 hour emergency call center
- Website troubleshooting guides
- Customized training programs
- Operational Testing Labs
- Engineering support
- Technical Development Center
- Se habla Espanol
|
|
|
